Tel: [email protected]
Add: RM1903,Building A, No.598 JiangNan RD,Hi-tech Zone, Ningbo City, Zhejiang Province, China
Tel: [email protected]
Add: RM1903,Building A, No.598 JiangNan RD,Hi-tech Zone, Ningbo City, Zhejiang Province, China
You can talk to our customer service center about your sourcing requirements.
HOME >> Solutions >> Feed mill equipment
It is mainly used for cooling of pellet feed in the feed pelleting section. It cools the pellet feed coming from pellet mill and with a temperature 70~ 90 degree to a temperature 3~5 degree slightly higher than ambient temperature, and is capable of lowering to a safety moisture content. Th cooled pellets not only improve the pellet firmness but also can prevent from going mouldy, that it is good for the transportation and storage of pellet feed.
| Model | Capacity(T/H) | Cooling volume(m3) | Power(KW) |
| SKLB2.5 | 5 | 2.5 | 1.5+0.55 |
| SKLB4 | 10 | 4 | 1.5+0.55 |
| SKLB6 | 15 | 6 | 1.5+0.55 |
| SKLB8 | 20 | 8 | 1.5+0.55+1.1 |
| SKLB10 | 25 | 10 | 1.5+1.1+0.75 |
| SKLB12 | 30 | 12 | 1.5+1.1+0.75 |
Features
The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture.Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack causedby sudden cooling produced by direct touching between cool air and hot pellets.At the Same time, Theairlock is used for feeding and space of air inlet bigger,therefore it can get better cooling effects.
.Slide reciprocating discharger has smooth and reliable discharging,low residue.
.Low pow consumption, easily operation.
·Pellet temperature after cooling is less than +3-5 ℃ambient temperature.
English
عربى 
Pусский
español
0086-574-87474989
