1. Main feeding line system consists of automatic driving device, a silo, a conveying pipe, an auger and a feed sensor.
2. The main feeding line system is mainly used to convey the feed in the silo into the hopper of the feeding line and automatically control the conveying opening/closing of the motor by the material level sensor to achieve the aim of automatic feeding. Performance parameters of main feeding line system
Feature 1, High-quality special driving reduction motor Power: 0.75kw, voltage: 380V, frequency: 50HZ, three-phase AC current 2, Feeding system Diameter of conveying pipe: φ75*3.6mm, material: PVC Helical spring auger from South Africa, Feeding ability: 1,400kg/h, maximum conveying length: 60m Radius of bending pipe: R1500 (inclination angle: 30 degrees) 3, Material level sensor from Israel: time delay range 0 to 2 hours
Height (no foundation)
Material description: silo roof plate and silo wall plate 2 layer-galvanized sheets with the thickness of 1.2mm; second layer of silo wall plate-galvanized sheet with the thickness of 1.5mm; Conical bottom plate-galvanized sheet with the thickness of 1.5mm; silo column- hot dip galvanizing on the surface No. 10 channel steel; support-φ3.6mm, 8 supports/silo
Complete chicken house feeding equipment including main feeding line, feeding line (male & female for breeder), drinking line, ventilation system, inviroment controller system